Prototype for discussion. A few prices and fitting rules are flagged below for the Blue Grouse team to confirm.
Wine wall planner prototype v4Prepared for Blue Grouse Wine Cellars by Brandcamp Digital
Plan your wine wall or room

Design your space, see your parts list

Pick a wall or a whole room, choose your racking system and finish, then place columns and bottles. Mix systems on the same wall if you like. We'll count the bottles and build the parts list in your currency.

1. Your space

2. Shipping to

3. Racking system

5. Place it

Wall elevation

Bottles0
Columns0
Estimate$0
PartQtyEachTotal
Estimated total$0

A Blue Grouse designer can check your layout and send a dimensioned installation drawing, with measurements from the floor and walls to every peg and bracket, so you know exactly where to drill.

Estimates only, before tax and shipping. Wall-mounted pegs need appropriate backing/anchor embedment and Float needs solid structural backing (3/4" plywood recommended). Angled walls, jogs, objects to be racked around and sloped ceilings are best handled by a Blue Grouse designer, who can check any layout before you order.

For the Blue Grouse team: assumptions to confirm
  • The V Bar hardware kit has no price yet, so it shows as "to confirm" and is left out of the total.
  • V Bar pegs use the "pair, no hardware" prices. Matte black cork forward pegs weren't on the list, so they use the aluminum price for now.
  • V Bar wall tie-back uses the short bracket by default. The customer can switch to the long one.
  • When the top section is cut to fit, the post stops 4" below the ceiling (bracket 3" to 5"). With no cutting, posts are whole 4 ft sections: 48", 96-1/4" or 144-1/2".
  • Label view pegs follow the Blue Grouse spacing drawing: the neck peg is 7-1/2" from the base peg and 3/4" higher, so bottles sit level. On panels, bottles are about 3.9" apart so the top bottle stays inside the 36" panel.
  • White gloss panels are shown for cork forward only, and priced the same as black.
  • Float columns in rooms over 12 ft use the 12 to 20 ft cable set plus individual cradles, since kits come with 12 ft cables. Sloped-ceiling cables aren't offered yet.
  • Peg and panel kits show standard gloss finishes. Bodaq vinyl finishes and the 6 ft curved kit are quote only.
  • In a room, each racked wall leaves about 13" clear at a corner where the next wall is also racked.